Cristin-prosjekt-ID: 2038834
Sist endret: 10. november 2021, 06:33

Cristin-prosjekt-ID: 2038834
Sist endret: 10. november 2021, 06:33
Prosjekt

Demonstration of Automated Drilling Process Control

prosjektleder

Sigmund Stokka
ved NORCE Energi ved NORCE Norwegian Research Centre AS

prosjekteier / koordinerende forskningsansvarlig enhet

  • NORCE Energi ved NORCE Norwegian Research Centre AS

Finansiering

  • TotalbudsjettNOK 85.000.000
  • Aker BP
    Prosjektkode: 259095
  • Vår Energi
    Prosjektkode: 259095
  • Equinor
    Prosjektkode: 259095
  • Norges forskningsråd
    Prosjektkode: 259095
  • Petrobras
    Prosjektkode: 259095
  • Total E&P
    Prosjektkode: 259095
  • Repsol Norge
    Prosjektkode: 259095

Kontaktinformasjon

Telefon
90139776
Sted
Sigmund Stokka

Tidsramme

Avsluttet
Start: 1. august 2016 Slutt: 31. oktober 2021

Beskrivelse Beskrivelse

Tittel

Demonstration of Automated Drilling Process Control

Populærvitenskapelig sammendrag

The underlying idea is to demonstrate a step change in drilling technology from the mainly mechanised process control used in the industry today to automated drilling process control and robotics. Other industries have increased efficiency through the introduction of automated process control and robotics.

The largest challenge to the petroleum industry today is the low profitability caused by high costs of well construction which typically constitutes 50% of the field development costs. A step change in drilling technology efficiency will give an opportunity to develop fields on the NCS faster, safer and more cost-efficiently with a resulting lower break-even oil price.

The project has a main focus of autonomous drilling, that can be implemented both on existing drilling units and on new ones, and has the potential of increasing the safety in operations as well as reducing the cost.

Vitenskapelig sammendrag

The primary objective of the proposed project is to demonstrate an automated drilling control process involving open interfaces, a robotic drillfloor system and DrillTronics capable of taking the changing downhole conditions into account.

Secondary objectives are
-Develop a detailed technical requirement specification
-Develop an open and independent interface to the drilling control system
-Demonstrate the integration of open drilling control system, the Canrig drilling system and Drilltronics in the Virtual Rig and make applications to automatic connection
-Install open drilling control system interface, Canrig robotic equipment and Drilltronics at Ullrigg and make necessary up-grades at Ullrigg
-Perform demonstrations of automatic pipehandling and automatic connection at Ullrigg

The present project covers a demonstration of automated drilling process including robotic (automated) drill floor equipment from Canrig, drilling process control (DrillTronics) from Sekal, an all new open and independent interface to the drilling control system and operational functions to prove real value added in implementing full drilling system automation by running the first test cases combining automatic top side equipment and downhole drilling optimization.

Metode

Demonstration of autonomous drilling at Openlab and at Ullrigg facilities at NORCE.

Utstyr

Openlab and Ullrigg Test Centre at NORCE.

prosjektdeltakere

prosjektleder

Sigmund Stokka

  • Tilknyttet:
    Prosjektleder
    ved NORCE Energi ved NORCE Norwegian Research Centre AS

Benoit Daireaux

  • Tilknyttet:
    Prosjektdeltaker
    ved NORCE Energi ved NORCE Norwegian Research Centre AS

Erik Wolden Dvergsnes

  • Tilknyttet:
    Prosjektdeltaker
    ved NORCE Energi ved NORCE Norwegian Research Centre AS

Sonja Moi

  • Tilknyttet:
    Prosjektdeltaker
    ved NORCE Energi ved NORCE Norwegian Research Centre AS

Liv Carlsen

  • Tilknyttet:
    Prosjektdeltaker
    ved NORCE Energi ved NORCE Norwegian Research Centre AS
1 - 5 av 7 | Neste | Siste »

Resultater Resultater

Autonomous drilling at Ullrigg.

Cayeux, Eric. 2021, NPF Stavanger. NORCEVitenskapelig foredrag

Precise Method to Estimate the Herschel-Bulkley Parameters from Pipe Rheometer Measurements.

Magnon, Elie; Cayeux, Eric. 2021, Fluids. TOTAL, NORCEVitenskapelig artikkel

A Technical Approach To Safe Mode Management For A Smooth Transition From Automatic to Manual Drilling.

Cayeux, Eric. 2021, SPE/IADC Drilling Conference 2021. NORCEVitenskapelig foredrag

A Technical Approach To Safe Mode Management For A Smooth Transition From Automatic to Manual Drilling.

Cayeux, Eric; Mihai, Rodica; Carlsen, Liv; Ørevik, Morten; Birgisson, Kjartan; Bergerud, Ronny. 2021, Society of Petroleum Engineers. NORCE, NOV, SEKVitenskapelig Kapittel/Artikkel/Konferanseartikkel

Autonomous Decision-Making While Drilling.

Cayeux, Eric; Daireaux, Benoit; Ambrus, Adrian; Mihai, Rodica G.; Carlsen, Liv. 2021, Energies. NORCEVitenskapelig artikkel
1 - 5 av 18 | Neste | Siste »