Cristin-resultat-ID: 1076039
Sist endret: 9. september 2014, 14:48
NVI-rapporteringsår: 2013
Resultat
Vitenskapelig artikkel
2014

Fibre reinforced lightweight aggregates

Bidragsytere:
  • Markus Bernhardt
  • Hilde Tellesbø
  • Harald Justnes og
  • Kjell Wiik

Tidsskrift

Journal of the European Ceramic Society
ISSN 0955-2219
e-ISSN 1873-619X
NVI-nivå 1

Om resultatet

Vitenskapelig artikkel
Publiseringsår: 2014
Publisert online: 2013
Trykket: 2014
Volum: 34
Hefte: 5
Sider: 1341 - 1351
Open Access

Importkilder

Scopus-ID: 2-s2.0-84892478347

Beskrivelse Beskrivelse

Tittel

Fibre reinforced lightweight aggregates

Sammendrag

Carbon steel fibre reinforced lightweight aggregates (LWA) were produced in a pilot scale rotary kiln. Narrow size fractions as well as not-sieved (asreceived) material were investigated according to European standards with a main focus on strength and density and compared to a reference materialwithout fibres. Depending on the size of the pellets a fraction of the fibres oxidized during firing. A strength increase proportional to the amountof non-oxidized fibres within the pellet was observed. The crushing resistance for as received fibre reinforced pellets (bulk density 452 kg/m3) was3.0 MPa corresponding to an increase in strength of 140%. The enhanced strength was also confirmed by the single pellet compression test.

Bidragsytere

Markus Bernhardt

  • Tilknyttet:
    Forfatter
    ved Institutt for materialteknologi ved Norges teknisk-naturvitenskapelige universitet

Hilde Tellesbø

  • Tilknyttet:
    Forfatter
    ved Weber

Harald Justnes

  • Tilknyttet:
    Forfatter
    ved Institutt for materialteknologi ved Norges teknisk-naturvitenskapelige universitet
  • Tilknyttet:
    Forfatter
    ved Arkitektur, byggematerialer og konstruksjoner ved SINTEF AS

Kjell Wiik

  • Tilknyttet:
    Forfatter
    ved Institutt for materialteknologi ved Norges teknisk-naturvitenskapelige universitet
1 - 4 av 4