Cristin-resultat-ID: 1646670
Sist endret: 21. desember 2018, 11:25
NVI-rapporteringsår: 2018
Resultat
Vitenskapelig artikkel
2019

Experimental investigation of a prototype R-600 compressor for high temperature heat pump

Bidragsytere:
  • Opeyemi Olayinka Bamigbetan
  • Trygve Magne Eikevik
  • Petter Nekså
  • Michael Bantle og
  • Christian Schlemminger

Tidsskrift

Energy
ISSN 0360-5442
e-ISSN 1873-6785
NVI-nivå 2

Om resultatet

Vitenskapelig artikkel
Publiseringsår: 2019
Publisert online: 2018
Trykket: 2019
Volum: 169
Sider: 730 - 738

Importkilder

Scopus-ID: 2-s2.0-85059560297

Beskrivelse Beskrivelse

Tittel

Experimental investigation of a prototype R-600 compressor for high temperature heat pump

Sammendrag

This research experimentally investigates a prototype compressor in a high temperature heat pump for industrial waste heat recovery from 50 °C to heat delivery at 115 °C. Compressors are the limiting component in the development of high temperature heat pumps due to the high discharge pressure and temperature. The prototype compressor is tested with butane due to its favourable thermodynamic properties within the operating conditions. The compressor allows the heat pump to provide heating for industrial processes such as pasteurization, drying, sterilization and other processes which require high temperature heat. The heat pump will replace the heating capacities of low-pressure steam boilers. It will also provide cooling for industrial waste heat or other cooling demands, replacing cooling capacities from cooling towers. The experimental setup consists of a 20 kW heat pump designed with the flexibility for multiple operating conditions applicable to different industrial applications. The compressor is designed to enable suction and discharge temperatures up to 80 °C and 140 °C respectively. It is found to have a total compressor efficiency of 74% and a volumetric efficiency of 83%. The results showed good operating parameters (temperature, pressure) and the potential for even higher temperature heat delivery

Bidragsytere

Opeyemi Olayinka Bamigbetan

  • Tilknyttet:
    Forfatter
    ved Institutt for energi- og prosessteknikk ved Norges teknisk-naturvitenskapelige universitet
Aktiv cristin-person

Trygve Magne Eikevik

  • Tilknyttet:
    Forfatter
    ved Institutt for energi- og prosessteknikk ved Norges teknisk-naturvitenskapelige universitet

Petter Nekså

  • Tilknyttet:
    Forfatter
    ved Gassteknologi ved SINTEF Energi AS
  • Tilknyttet:
    Forfatter
    ved Institutt for energi- og prosessteknikk ved Norges teknisk-naturvitenskapelige universitet

Michael Bantle

  • Tilknyttet:
    Forfatter
    ved Termisk energi ved SINTEF Energi AS

Christian Schlemminger

  • Tilknyttet:
    Forfatter
    ved Termisk energi ved SINTEF Energi AS
1 - 5 av 5