Cristin-resultat-ID: 1817119
Sist endret: 10. desember 2020, 09:43
NVI-rapporteringsår: 2020
Resultat
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
2020

Charcoal and Use of Green Binder for Use in Carbon Anodes in the Aluminium Industry

Bidragsytere:
  • Camilla Sommerseth
  • Ove Darell
  • Bjarte Arne Øye
  • Anne Støre og
  • Stein Rørvik

Bok

Light Metals 2020
ISBN:
  • 978-3-030-36407-6

Utgiver

Springer
NVI-nivå 1

Serie

The Minerals, Metals & Materials Series
ISSN 2367-1181
e-ISSN 2367-1696
NVI-nivå 1

Om resultatet

Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
Publiseringsår: 2020
Hefte: 56
Sider: 1338 - 1347
ISBN:
  • 978-3-030-36407-6
Open Access

Klassifisering

Fagfelt (NPI)

Fagfelt: Kjemi og materialteknologi
- Fagområde: Realfag og teknologi

Beskrivelse Beskrivelse

Tittel

Charcoal and Use of Green Binder for Use in Carbon Anodes in the Aluminium Industry

Sammendrag

Carbon anodes for aluminium production are produced from calcined petroleum coke (CPC), recycled anode butts and coal tar pitch (CTP). The CO2 produced during anode consumption contributes to a substantial amount of the CO2 footprint of this industrial process. Charcoal from wood has been suggested to partly replace coke in anodes but high porosity, low electrical resistivity and high ash content contributes negatively to final anode properties. In this work, charcoal from Siberian larch and spruce was produced by heat treatment to 800, 1200 and 1400 ℃ and acid-washed with H2SO4. Acid-washing resulted in reduced metal impurity and the porosity decreased with increasing heat treatment. Pilot anodes were made from CTP, CPC with some additions of spruce and larch charcoal. Another set of pilot anodes were produced using a green binder. Compared to reference anodes, the CO2 reactivity of anodes containing larch was less affected compared to anodes containing spruce. The green binder was found to be highly detrimental for the anodes’ CO2 reactivity properties. Electrochemical consumption increased for anodes containing both green binder, larch and spruce compared to the reference anode.

Bidragsytere

Camilla Sommerseth

  • Tilknyttet:
    Forfatter
    ved Metallproduksjon og prosessering ved SINTEF AS

Ove Darell

  • Tilknyttet:
    Forfatter
    ved Metallproduksjon og prosessering ved SINTEF AS

Bjarte Arne Øye

  • Tilknyttet:
    Forfatter
    ved Metallproduksjon og prosessering ved SINTEF AS

Anne Støre

  • Tilknyttet:
    Forfatter
    ved Metallproduksjon og prosessering ved SINTEF AS

Stein Rørvik

  • Tilknyttet:
    Forfatter
    ved Metallproduksjon og prosessering ved SINTEF AS
1 - 5 av 5

Resultatet er en del av Resultatet er en del av

Light Metals 2020.

Tomsett, Alan. 2020, Springer. AUSTRALIAVitenskapelig antologi/Konferanseserie
1 - 1 av 1