Ageing effects on two-component injection molded thermoplastic elastomers on polyamide-12

The effect of ageing on the adhesion between thermoplastic elastomer materials and glass fiber reinforced polyamide-12 materials was evaluated. Test specimens were made by two-component injection molding, and the melt temperatures and the glass fiber fraction were varied. Adhesion before and after ageing was assessed via peel tests. Ageing (11-22 weeks at 70 °C with 62% relative humidity) severely reduced the adhesion strength. This could be explained by broken covalent bonds and/or disentanglement in the interphase. The individual materials were not severely affected by the ageing.