Sammendrag
Laser hybrid welding has been used in European shipbuilding for many years due to its high productivity. In order to qualify the process for the oil and gas industry, an extensive welding and testing programme is needed, and the properties must satisfy more severe requirements than in shipbuilding. This is particularly the case when these activities are moving to the Arctic regions, where low temperature toughness may be the primary challenge. The present investigation addressed preliminary welding trials carried out with 15 kW fibre laser-gas metal arc (GMA) hybrid welding using double Y joint of 20 mm thick 420 MPa steel plates. Both Charpy V notch impact and CTOD fracture mechanical testing were included at 40 and 30°C, respectively. The results indicate that the heat affected zone (HAZ) of the examined steel appeared with satisfactory toughness (> 200 J, > 0.2 mm) while the employed weld metal had insufficient impact properties. The weld metal CTOD toughness approached 0.2 mm. With a better welding wire, designed for low temperature applications, it is reasonable to suggest that laser hybrid arc welding can be used for applications even below 30 to 40°C.
Vis fullstendig beskrivelse
