Cristin-resultat-ID: 2101888
Sist endret: 4. januar 2024, 14:41
NVI-rapporteringsår: 2023
Resultat
Vitenskapelig artikkel
2023

Toward the recovery of solar silicon from end-of-life PVs by vacuum refining

Bidragsytere:
  • Arman Hoseinpur Kermani
  • Kai Tang
  • Alexander Ulyashin
  • Wolfram Palitzch og
  • Jafar Safarian

Tidsskrift

Solar Energy Materials and Solar Cells
ISSN 0927-0248
e-ISSN 1879-3398
NVI-nivå 2

Om resultatet

Vitenskapelig artikkel
Publiseringsår: 2023
Volum: 251
Artikkelnummer: 112181
Open Access

Importkilder

Scopus-ID: 2-s2.0-85145977805

Beskrivelse Beskrivelse

Tittel

Toward the recovery of solar silicon from end-of-life PVs by vacuum refining

Sammendrag

Considering the boom of Si solar cell installation, it is necessary to establish a process for recycling of Si from End-of-life photovoltaics (PVs). Silicon in the PVs is synthetically doped and coated by various elements and hence dedicated methods will be required for recycling of Si, back to the SoG-Si. In this research, recycling of Si from the shredded solar cells is studied by means of vacuum refining process. In this research the rejected solar cells after the firing step are treated by acid etching techniques to remove the Al back layer and the Ag finger on the front side of the cells, providing a product called de-metallized Si fragments. The vacuum refining experiments were carried out on demetallized Si fragments. Results showed the demetallized Si contained presence of P (11.67 ppmw), B (1 ppmw), Ca with up to 0.28 wt%, Ag (96 ppmw) and Sn (136 ppmw), while other metallic impurities were lower. We have shown that Sn, Ag, O, N, and Mg can be removed from the Si melt via short vacuum refining, while a complete removal of Ca and P required longer times compared to the mentioned impurities. Because vacuum refining process is not limited by thermodynamic equilibrium, a full removal of all the volatile impurities at extended times is expected and then this process has a high chance for returning the recovered Si to the solar grade requirements.

Bidragsytere

Arman Hoseinpur Kermani

  • Tilknyttet:
    Forfatter
    ved Institutt for materialteknologi ved Norges teknisk-naturvitenskapelige universitet

Kai Tang

  • Tilknyttet:
    Forfatter
    ved Metallproduksjon og prosessering ved SINTEF AS

Alexsander G. Ulyashin

Bidragsyterens navn vises på dette resultatet som Alexander Ulyashin
  • Tilknyttet:
    Forfatter
    ved Metallproduksjon og prosessering ved SINTEF AS

Wolfram Palitzch

  • Tilknyttet:
    Forfatter
    ved Tyskland

Jafar Safarian

  • Tilknyttet:
    Forfatter
    ved Institutt for materialteknologi ved Norges teknisk-naturvitenskapelige universitet
1 - 5 av 5