Cristin-resultat-ID: 41736
Sist endret: 25. juni 2010, 14:45
NVI-rapporteringsår: 2010
Resultat
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
2010

WET GAS IMPELLER TEST FACILITY

Bidragsytere:
  • Trond G. GrÜner og
  • Lars Eirik Bakken

Bok

Proceedings of the ASME Turbo Expo 2010 : Power for land, sea and air (GT2010), June 14-18, 2010, Glasgow, UK
ISBN:
  • 978-0-7918-3872-3

Utgiver

The American Society of Mechanical Engineers (ASME)
NVI-nivå 1

Om resultatet

Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
Publiseringsår: 2010
ISBN:
  • 978-0-7918-3872-3

Beskrivelse Beskrivelse

Tittel

WET GAS IMPELLER TEST FACILITY

Sammendrag

The development of wet gas compressors will enable increased oil and gas production rates and enhanced profitable operation by subsea well-stream boosting. A more fundamental knowledge of the impact of liquid is essential with regard to the understanding of thermodynamic and fluid dynamic compressor behavior. An open-loop impeller test facility was designed to investigate the wet gas performance, aerodynamic stability, and operation range. The facility was made adaptable for different impeller and diffuser geometries. In this paper, the wet gas test facility and experimental work concerning the impact of wet gas on a representative fullscale industrial impeller are presented. The centrifugal compressor performance was examined at high gas volume fractions and atmospheric inlet conditions. Air and water were used as experimental fluids. Dry and wet gas performance was experimentally verified and analyzed. The results were in accordance with previous test data and indicated a stringent influence of the liquid phase. Air/water tests at atmospheric conditions were capable of reproducing the general performance trend of hydrocarbon wet gas compressor tests at high pressure. Key words: Wet gas performance, impeller test facility

Bidragsytere

Trond Gammelsæter Gruner

Bidragsyterens navn vises på dette resultatet som Trond G. GrÜner
  • Tilknyttet:
    Forfatter
    ved Institutt for energi- og prosessteknikk ved Norges teknisk-naturvitenskapelige universitet

Lars Eirik Bakken

  • Tilknyttet:
    Forfatter
    ved Institutt for energi- og prosessteknikk ved Norges teknisk-naturvitenskapelige universitet
1 - 2 av 2

Resultatet er en del av Resultatet er en del av

Proceedings of the ASME Turbo Expo 2010 : Power for land, sea and air (GT2010), June 14-18, 2010, Glasgow, UK.

ASME, conference. 2010, The American Society of Mechanical Engineers (ASME). Vitenskapelig antologi/Konferanseserie
1 - 1 av 1