Info
Meny
English
Logg inn
Søk etter prosjekter, resultater og personer
Søk etter prosjekter, resultater og personer
Historikk
Cristin-resultat-ID:
850229
Sist endret:
2. august 2012, 14:31
NVI-rapporteringsår:
2012
Resultat
Vitenskapelig artikkel
2012
Determination of Welding Heat Source Parameters Using the Actual Bead Shape
Amin Shahrestani Azar
Sigmund Kyrre Ås
og
Odd Magne Akselsen
Tidsskrift
Tidsskrift
Computational Materials Science
ISSN 0927-0256
e-ISSN 1879-0801
NVI-nivå 2
Finn i kanalregisteret
Om resultatet
Om resultatet
Vitenskapelig artikkel
Publiseringsår: 2012
Volum: 54
Sider: 176 - 182
Lenker
Lenker
original online (doi)
https://doi.org/10.1016/j.commatsci.2011.10.025
Importkilder
Importkilder
Scopus-ID: 2-s2.0-83155191128
Isi-ID: 000300471500029
Beskrivelse
Beskrivelse
Engelsk
Tittel
Determination of Welding Heat Source Parameters Using the Actual Bead Shape
Sammendrag
Analytical and numerical approaches are used to model a gas metal arc welding (GMAW) process. In order to simulate the detailed aspects of material changes during the process, it is important to implement the correct size and distribution of the heat source. In this study the dimensions of a heat source model in a welding case will be calculated based on experimentally observed weld pool sizes. An analytical approach called ‘discretely distributed point heat source model’ will be used for this purpose as an intermediate stage between the experiments and the numerical model. In the numerical approach, the heat source will be split into two perpendicular 2D ellipsoidal sources that correspond to the double-ellipsoidal heat source model. The third dimension of the heat source will be measured from the top-view of the end crater. WeldSimS and Matlab codes are used for finite element and analytical investigations respectively. Both models were compared and analyzed with respect to similar boundary conditions. Numerical simulations show good agreement with the analytical approach calibrated by actual weld dimensions.
Vis
fullstendig beskrivelse
Bidragsytere
Bidragsytere
Amin Shahrestani Azar
Forfatter
ved Institutt for maskinteknikk og produksjon ved Norges teknisk-naturvitenskapelige universitet
Sigmund Kyrre Ås
Forfatter
ved Skip og havkonstruksjoner ved SINTEF Ocean
Odd Magne Akselsen
Forfatter
ved Materialer og nanoteknologi ved SINTEF AS
Forfatter
ved Institutt for maskinteknikk og produksjon ved Norges teknisk-naturvitenskapelige universitet
1
-
3
av
3